跳到主要內容

安裝 Linux mint 17 的efi分割區

2016 / 7 / 17 更新:

  • 測試了Linux Mint 17.3,沒問題,我採用單系統,就是沒有Windows whatsoever installed
  • 底下註1的提醒,不會出現,所以要自己記得要:用EFI模式開機、 記得自己增加一個EFI partition、製作這個partition時,種類選擇EFI 即可,下面的3.說的步驟可以省略。
  • 我的EFI partition大小為200 MB,為sda1。這是完全用猜的。
  • Figure credit: linuxmint.com



2015 / 9 / 10 更新:

的步驟,可以解決安裝好不能開機的問題。雖然他講的是針對OpenSuse的操作,但是開機、EFI分割區等概念是相通的。在OpenSuse 13.1上面實測是ok的。



2014 / 11 / 21 

重點如下:


  1. 光碟要用EFI模式開機
  2. 硬碟中要有一個EFI分割區(至少35MB,不知道這個大小是否與系統有關)
  3. 硬碟分割的那個畫面,Device for bootloader installation處,應指到2的EFl分割區(EFI boot partition)
根據資料來源的說明如下

    VERY IMPORTANT STEP!!! Near bottom of window, "Device for bootloader installation" should be the EFI System Partition. Select that one in the drop-down box. It will be a small (200-550MB) partition formatted as FAT32. It will likely be /dev/sda1 or /dev/sda2; but double-check that to be sure.

  • 註1:硬碟分割的那個畫面,如果沒有EFI分割區,按下一步時系統會警告要設一個EFI分割區,也會建議其大小並建立。

  • 註2:若上面1的光碟沒有用EFI模式開機,上面的警告會變成Reversed bios boot partition,沒有EFI可以選。用Reversed bios boot partition裝好之後無法開機,推測是找不到啟動分割區的原因,所以知道不要再往下,應該重新用光碟開機,且開機在EFI模式。
資料來源:Linux Mint Forums




留言

這個網誌中的熱門文章

octave 繪圖的字體調整 fontsize

用octave繪圖的時候,通常有下面的調整: figure (1);  #####設定x軸字體 xticklabel set(gca(), 'fontsize', 24)    plot(randn(100,1)); #####利用text property調整字體 legend('{\fontsize {24} random pts}');  xlabel('{\fontsize {24} X axis annotation'); 參考資料: octave manual matlab central

守望台書庫光碟2010安裝在ubuntu 11.10

更新: 書庫可以在ubuntu 12.04 (wine 1.4)中順利運行,不必經歷下面的修改步驟。 因為一不小心把ubuntu 11.04升級到11.10,發現《守望台書庫光碟2010》(Watchtower Library 2010)本來可以運作好好的,竟然不能工作了。底下是我找到的一些克服的方法: 因為是從11.04升級到11.10,因此我的wine版本是wine-1.3.28,而這個版本,也是出現問題的版本,原因在 wineHQ的網頁 上有講: Watchtower Library 2010 does not work in wine 1.3.27/28 While this bug is not fixed you can fix it yourself. You need to remove a manifest for built-in version of MS runtime library. You can do this by executing the following code in terminal: rm ~/.wine/drive_c/windows/winsxs/manifests/*.vc90.*_deadbeef.manifest 怎麼知道安裝的wine的版本?打開『終端機』,鍵入 wine --version 解決的方法 先安裝《守望台書庫光碟2010》英文版,之後再安裝中文版。我不知道安裝的先後有沒有一定,也沒測試到不裝英文會不會有影響。安裝方法跟一般的安裝微軟程式差不多。以中文版為例,放入光碟,打開『終端機』,鍵入 cd /media/WTLIB10CH wine ./Setup.exe  就會進行安裝,安裝步驟你也可以參考下面講到的  -: an everyday story of country folk :- 安裝完之後,桌面會有兩個圖示,其中一個 .link的沒有用,可以刪除。雙按桌面的另一個圖示,名稱是『Watchtower Library 2010 - 漢語繁體字』,不能執行! 接下來用上面講到的原因,要刪到一個manifest,不懂是什麼意思。在『終端機』,鍵入 rm ~/.wine/drive_c/windo

Windows 使用遠端桌面(RDP) 連線遙控 Linux Mint

Main steps: make sure xrdp and vino are installed make sure extra tightvncserver is also installed use vino-preferences to switch on/off the permission use sudo /etc/init.d/xrdp restart to restart vnc server references: Windows 使用遠端桌面(RDP) 連線遙控 Ubuntu install tightvncserver image credit: sourceforge.net